Von Duprin EPT10SP313 Electric Power Transfer Dark Bronze

Product Description

The VON DUPRIN EPT10SP313 is an electric power transfer unit designed to carry low-voltage control signals and power across door frames that include an active leaf or a door with electrified hardware. It uses ten 24-gauge wires to route signals between the frame-side access control equipment and the door-mounted devices, such as electrified locksets, request-to-exit sensors, or door position switches. The unit ships in an SP313 dark bronze finish, matching standard architectural hardware families used in commercial door assemblies. Licensed electricians and credentialed access control technicians are the typical installers for this type of device.

The EPT10SP313 is suited for commercial and institutional door applications where continuous-hinge or concealed-hinge door assemblies require a reliable transfer of multiple conductors without exposed flex loops or surface cables. Typical installations include office buildings, schools, hospitals, government facilities, and other high-traffic public buildings where access control integration and door monitoring are required. The ten-conductor configuration supports installations where several independent circuits must cross the door gap simultaneously.

Key Features

• Ten-conductor 24-gauge wire configuration supports multiple simultaneous low-voltage circuits across the door gap
• SP313 dark bronze finish coordinates with standard commercial architectural hardware
• Compact profile minimizes visible hardware footprint on the door edge
• Designed for commercial and institutional door assemblies requiring integrated access control wiring
• Single-unit quantity per order allows precise project-level procurement

Compatibility

Designed as an OEM-style electric power transfer for commercial door assemblies requiring multi-conductor low-voltage signal and power routing across hinged door frames.

Installation Notes

Installation should be performed by a licensed electrician or a qualified access control technician familiar with low-voltage wiring practices and applicable local codes. Disconnect and de-energize all access control power supplies before beginning installation or removal. Verify that the conductor count and gauge are compatible with the connected control panel or power supply before making terminations. Do not over-bend or pinch the wire bundle during door cycling tests.