Victor 14201113 Mig Wire Liner 0.030-0.035 in 15 Ft Tweco

Product Description

The VICTOR 14201113 is a wire conduit liner designed for MIG welding guns, providing a smooth, low-friction path for wire feed from the drive roll through the gun cable to the contact tip. Compatible with wire diameters ranging from 0.030 to 0.035 inches, it spans a full 15 feet in overall length to accommodate standard MIG gun cable assemblies. This liner maintains consistent wire feed speed and reduces the risk of birdnesting or burnback caused by irregular wire travel. It is installed by welding technicians and fabrication professionals during gun maintenance or when replacing a worn or kinked liner.

This wire conduit liner is suited for MIG welding applications in both light fabrication and production environments. It is specified for use with Tweco-style MIG guns, making it a direct-fit replacement during scheduled gun service or unplanned liner failure. Replacing the liner on a regular maintenance interval helps preserve wire feed consistency, arc stability, and weld quality. It is appropriate for use with mild steel or similar wire types within the supported diameter range.

Key Features

• Supports wire outside diameters from 0.030 to 0.035 inches (0.80 to 0.90 mm)
• 15-foot overall length fits standard MIG gun cable assemblies
• Designed for use with Tweco MIG gun bodies
• Smooth conduit bore reduces wire feed resistance and limits birdnesting
• Direct replacement style simplifies in-field or shop maintenance

Compatibility

Designed for use with Tweco MIG welding guns accepting wire diameters from 0.030 to 0.035 inches and requiring a 15-foot wire conduit liner.

Installation Notes

Wire conduit liners are replaced by qualified welding technicians during gun maintenance. Before servicing the gun, disconnect the welding power source and release all wire tension from the drive roll system. Feed the new liner through the gun cable carefully to avoid kinking, then trim to the correct length per the gun manufacturer's instructions before seating the contact tip and nozzle. Follow applicable AWS and equipment manufacturer guidelines for MIG gun assembly and maintenance procedures.