Vermont Gage 141122250 Class X Plus Pin Gage 0.2225 in

Product Description

The VERMONT GAGE 141122250 is a Class X Plus pin gage machined to a diameter of 0.2225 inches with a tolerance of 0.00004 inches. It is used by metrology technicians, quality control inspectors, and precision machinists to verify bore diameters, hole sizes, and feature dimensions directly on production parts or measuring equipment. The gage is made from steel with a bright, uncoated finish and measures 2 inches in length. Each unit ships with a Certificate of Accuracy backed by NIST traceability, confirming it meets the requirements for Class X Plus classification.

This pin gage is suited for use in production inspection environments, tool rooms, and calibration labs. It is applied wherever a precise go/no-go or direct measurement check is needed for a 0.2225-inch nominal feature. Typical users include dimensional inspection personnel in aerospace, automotive, medical device, and general manufacturing settings. The NIST-traceable certificate makes it appropriate for use in ISO 9001 and AS9100 quality system environments where documented calibration traceability is required.

Key Features

• Class X Plus tolerance of 0.00004 inches for high-precision dimensional verification
• Steel construction for durability and dimensional stability
• Bright, uncoated finish for easy visual inspection of the gage surface
• 2-inch usable length provides adequate reach for typical bore and hole checks
• Includes Certificate of Accuracy with NIST traceability for documented calibration compliance

Compatibility

Designed as a precision dimensional gage for direct measurement of 0.2225-inch nominal holes, bores, and features, and for calibration of associated measuring equipment requiring Class X Plus pin gage standards.

Installation Notes

Pin gages should be handled with clean, lint-free gloves or wiped free of oils and debris before use to prevent corrosion and measurement error. Store the gage in its designated case or holder when not in use to protect the ground surface from damage. Do not force the gage into a feature; light hand pressure is the correct insertion method. Calibration intervals should be established per your facility quality management system requirements.