Vermont Gage 141119500 Class X Plus Pin Gage 0.195 in

Product Description

The VERMONT GAGE 141119500 is a Class X Plus precision pin gage used to measure and verify bore diameters, hole sizes, and slot widths in machined or fabricated parts. It measures 0.195 inches in diameter and 2 inches in length, manufactured from tool steel with a 4 micro surface finish. The tolerance is held to +0.00004 inches, placing it in the tightest standard class for go/no-go and attribute gaging. Each unit ships with a Certificate of Accuracy with NIST traceability, making it suitable for use in calibrated inspection environments. Machinists, quality technicians, and tool-and-die professionals are the typical end users.

This pin gage is designed for direct part gaging and calibration of measuring equipment in precision manufacturing and quality control settings. Typical applications include checking drilled, reamed, or punched holes in production parts against a defined tolerance. The 2-inch length provides adequate grip and handling clearance in most inspection fixtures. It is appropriate for both shop-floor use and controlled metrology labs where NIST-traceable documentation is required for audit compliance.

Key Features

• Class X Plus tolerance of +0.00004 inches for tight-tolerance attribute gaging
• 0.195-inch nominal diameter, 2-inch length in tool steel construction
• 4 micro surface finish for consistent contact and accurate measurement
• Includes Certificate of Accuracy with NIST traceability for calibration records
• Single-piece packaging suitable for individual tool crib or inspection kit use

Compatibility

Designed as a direct-measurement gage for use with standard pin gage handles, gage blocks, and inspection fixtures that accept 0.195-inch diameter pin gages in Class X Plus tolerance class.

Installation Notes

Pin gages do not require installation in the traditional sense but should be handled with clean, dry hands or cotton gloves to prevent surface corrosion from skin oils. Before use, verify the gage is clean and free of burrs or debris that could affect measurement accuracy. Store in a protective case away from other metal tooling to prevent contact damage to the precision-ground surface. Calibration intervals should follow your facility quality management system in accordance with applicable metrology standards.