Vermont Gage 141101350 Class X Plus Pin Gage 0.0135 in

Product Description

The VERMONT GAGE 141101350 is a Class X Plus pin gage machined from tool steel for precision measurement and inspection work. It measures 0.0135 inches in diameter and 2 inches in length, with a tolerance of +0.00004 inches, placing it in the tightest commercially available gage accuracy class. A 4 micro finish on the gage surface supports consistent, repeatable contact with the workpiece. Each unit ships with a Certificate of Accuracy with NIST traceability, making it suitable for calibration programs and documented quality systems. Dimensional inspection professionals, toolroom technicians, and quality control inspectors are the primary users of this gage.

This pin gage is used to verify hole diameters, check slot widths, or calibrate measuring equipment in manufacturing, tooling, and inspection environments. The 0.0135-inch diameter targets very small bores common in precision machined parts, watch components, instrument housings, medical device bodies, and fine-pitch hydraulic or pneumatic fittings. It is appropriate for both shop-floor go/no-go checks and laboratory-grade calibration applications where NIST-traceable documentation is required by quality standards.

Key Features

• Class X Plus tolerance of +0.00004 inches for the highest precision measurement accuracy
• Tool steel construction for durability and dimensional stability under repeated use
• 4 micro surface finish supports reliable contact and repeatable measurements
• NIST-traceable Certificate of Accuracy included with each gage
• 0.0135-inch diameter targets small-bore inspection applications
• 2-inch length provides adequate handling clearance during inspection tasks

Compatibility

Designed as an OEM-style replacement or calibration-grade addition for precision inspection setups requiring a 0.0135-inch Class X Plus pin gage with NIST-traceable certification.

Installation Notes

Pin gages of this class are handled by calibration technicians or quality inspectors trained in precision measurement practices. Always clean the gage and the feature being measured before use to prevent debris from affecting contact and reading accuracy. Store in the original case or a protective holder to prevent surface damage that would compromise the 4 micro finish. Do not force the pin into an undersized feature, as this can cause permanent deformation of the gage tip or the workpiece bore.