Vermont Gage 111413150 Class Zz Minus Plug Pin Gage 0.1315 in

Product Description

The VERMONT GAGE 111413150 is a Class ZZ minus plug pin gage ground to a diameter of 0.1315 inches with a tolerance of 0.0002 inches. This single-ended pin gage is used as a NoGo member in go/no-go attribute inspection routines, confirming that a bored or drilled hole has not exceeded its maximum material condition. At 2 inches in overall length, it fits standard gage handle chucks and works alongside set micrometers, verniers, and other precision measuring devices. The steel construction and 10 microfinish surface finish ensure dimensional stability across repeated use cycles. A Certificate of Accuracy with NIST traceability ships with each gage.

This pin gage is suited to quality control and inspection applications in machining, fabrication, and manufacturing environments. It is used by machinists, quality technicians, and tool-and-die professionals to verify hole diameters on production parts where tight tolerances are critical. The Class ZZ designation indicates a commercial-grade tolerance class appropriate for inspection of medium-precision work. The minus designation means the gage is ground to the lower boundary of the nominal diameter, making it correct for NoGo inspection duty.

Key Features

• Class ZZ minus tolerance class, ground for NoGo hole inspection
• 0.1315 inch nominal diameter with 0.0002 inch tolerance
• 2 inch overall length fits standard gage handle chucks
• Steel construction with 10 microfinish surface for dimensional stability
• Includes Certificate of Accuracy with NIST traceability
• Compatible with set micrometers, verniers, and other calibrated measuring devices

Compatibility

Designed for use as a NoGo inspection gage member and for setting micrometers, verniers, and other measuring devices requiring a 0.1315 inch reference diameter. Fits standard gage handle chucks sized for small-diameter pin gages.

Installation Notes

Pin gages are handled by quality technicians and inspection personnel. Store in the protective case or roll when not in use to prevent surface damage. Clean the gage and the hole being checked before use to avoid false readings caused by contamination. Do not force the gage into an undersized hole, as this can damage the ground surface and alter the calibrated diameter.