Value Collection ZSNYDL2-5-50PK Fork Terminal 50 Pack

Product Description

The VALUE COLLECTION ZSNYDL2-5-50PK is a standard fork terminal sold in a 50-piece pack. It is designed for crimp-style wire terminations and uses a partially insulated nylon construction in blue. The terminal accepts wire sizes from 1.5 to 2.5 square millimeters and is rated for 600 volts. The copper contact provides reliable conductivity at the connection point. The number 10 stud size and 5.30 mm stud diameter make this terminal a common choice for panel wiring, control circuits, and equipment grounding connections. Electricians and panel builders install these terminals during new construction, service work, and equipment assembly.

This fork terminal is suited for residential and commercial electrical applications where crimp-style spade or fork connections are required. Typical uses include terminal block connections, control panel wiring, HVAC low-voltage circuits, and general electrical equipment assembly. The blue color coding corresponds to the 1.5 to 2.5 square millimeter wire gauge range, which aids in quick visual identification during installation and inspection. The partial insulation covers the barrel while leaving the fork open for stud engagement.

Key Features

• Crimp connection type for fast, reliable termination without soldering
• Partially insulated nylon sleeve in blue for wire gauge color coding
• Rated 600 volts for use in standard low- and line-voltage control circuits
• Copper contact material for strong electrical conductivity
• Number 10 stud size with 5.30 mm stud diameter for broad hardware compatibility
• Sold in a 50-piece pack to support production and service work efficiently

Compatibility

Designed for use with 1.5 to 2.5 square millimeter wire and number 10 studs. Suitable as a standard fork terminal in residential and commercial electrical panel, control, and equipment wiring applications.

Installation Notes

Installation should be performed by a licensed electrician in accordance with applicable NEC requirements. De-energize and lock out the circuit before terminating any wires. Use a calibrated ratcheting crimping tool sized for the wire gauge and terminal barrel to ensure a gas-tight crimp. Do not over-crimp or use pliers as a substitute for a proper crimping tool, as this can compromise the connection.