Value Collection ZRNYDL2-3.7 Ring Terminal 16-14 Awg Crimp 6

Product Description

The VALUE COLLECTION ZRNYDL2-3.7 is a partially insulated circular ring terminal designed for crimp connections on 16 to 14 AWG copper wire. The nylon insulation sleeve is blue, indicating its 16 to 14 AWG range for quick field identification. The copper contact measures 1 inch in overall length and 0.335 inches in ring width, with a material thickness of 0.031 inches. The terminal accepts a number 6 stud, equivalent to 3.7 mm. Electricians and panel wiring technicians use this terminal when terminating control wiring, branch circuit conductors, or low-voltage leads to screw terminals and bus bars.

This ring terminal is suited for residential and light commercial electrical installations where a secure, vibration-resistant crimp termination is required. Typical applications include control panel wiring, appliance wiring harnesses, HVAC low-voltage circuits, and field-wired equipment connections. The partially insulated design provides a grip area at the wire barrel while leaving the ring open for stud mounting. Compatible wire sizes range from 1.50 to 2.50 square millimeters, covering the 16 to 14 AWG range used heavily in control and signal circuits.

Key Features

• Partially insulated nylon sleeve in blue for 16 to 14 AWG wire identification
• Crimp connection type for reliable, gas-tight wire termination
• Copper contact material for excellent conductivity and corrosion resistance
• Number 6 stud size (3.7 mm) fits standard screw terminals and binding posts
• cUL Listed and UL Listed with RoHS compliance
• Compact 1 inch overall length fits tight wiring compartments

Compatibility

Designed as an OEM-style replacement or standard field terminal for crimp-style ring terminal applications on 16 to 14 AWG conductors with number 6 stud connections.

Installation Notes

Installation should be performed by a qualified electrician in accordance with NEC requirements. De-energize and lock out the circuit before terminating any conductors. Use a calibrated ratcheting crimp tool rated for the AWG range being terminated to ensure a proper gas-tight crimp. Do not solder over a crimped connection, as this can introduce brittleness at the barrel.