Value Collection ZMSCVB75229 Viton O-ring Dash 229

Product Description

The VALUE COLLECTION ZMSCVB75229 is a Dash 229 Viton O-ring manufactured from fluoroelastomer compound and used as a static or dynamic sealing element in fluid and gas systems. It measures 2.375 inches inside diameter, 2.625 inches outside diameter, and 0.125 inches thick with a round cross section. Rated for service from -15 degrees F to 400 degrees F, this O-ring suits high-temperature and chemical-aggressive environments. A Shore A hardness of 75 provides a firm, reliable seal with low compression set. Brown in color, it is compatible with petroleum-based fluids and offers low gas permeability for vacuum service applications. Licensed plumbers, HVAC technicians, and industrial maintenance technicians are the primary installers.

This O-ring is suited for residential and commercial plumbing, HVAC refrigerant-side assemblies, hydraulic systems, and fuel-handling equipment where petroleum product exposure is expected. Its wide chemical compatibility and high-temperature resistance make it a practical choice for pump housings, valve stems, cylinder heads, and fitting connections operating in demanding service conditions. Sold in packages of 10, it supports service stock and maintenance kit builds for facilities and field technicians alike.

Key Features

• Fluoroelastomer (Viton-type) construction resists petroleum products, fuels, and a wide range of chemicals
• Rated from -15 degrees F to 400 degrees F for high-temperature service environments
• Shore A hardness of 75 delivers low compression set and long-term sealing integrity
• Low gas permeability makes this O-ring suitable for vacuum service applications
• Round cross section in standard Dash 229 sizing for straightforward replacement fitment
• Sold in a package of 10 to support field stock and maintenance kits

Compatibility

Designed as a standard Dash 229 O-ring replacement for grooves and fittings that accept a 2.375-inch ID, 2.625-inch OD, 0.125-inch thick round-section seal in petroleum-compatible or high-temperature service applications.

Installation Notes

Licensed plumbers, HVAC technicians, or qualified maintenance technicians should install this O-ring. Depressurize and drain the system fully before removing the old seal to prevent injury or fluid release. Inspect the O-ring groove for nicks, burrs, or corrosion before seating the new ring. Apply a compatible lubricant to the O-ring prior to assembly to reduce the risk of tearing during installation; do not use petroleum-based lubricants on seals not rated for petroleum service.