Value Collection ZMSCVB75132 Viton O-ring Dash 132 10 Pack

Product Description

The VALUE COLLECTION ZMSCVB75132 is a Dash 132 O-ring made from Viton fluoroelastomer, designed for static and dynamic sealing applications across HVAC, plumbing, hydraulic, and industrial fluid systems. It measures 1.75 inches inside diameter, 1.938 inches outside diameter, and 0.094 inches thick, with a round cross-section and Shore A hardness of 75. The brown fluoroelastomer compound delivers a wide service temperature range of -15 degrees F to 400 degrees F, making it suitable for high-heat and chemically aggressive environments. Each package contains 10 O-rings. Licensed tradespeople and maintenance technicians working with petroleum-based systems are the primary installers.

This O-ring is suited for use in residential and commercial HVAC systems, refrigeration equipment, hydraulic assemblies, fuel-handling components, and plumbing connections where exposure to petroleum products, solvents, or elevated temperatures is expected. The fluoroelastomer material provides low compression set and low gas permeability, making it appropriate for vacuum service as well as pressure-side sealing. It is not FDA approved and should not be used in food-contact or potable-water applications.

Key Features

• Viton fluoroelastomer construction with strong resistance to petroleum products, fuels, and many industrial chemicals
• Service temperature range of -15 degrees F to 400 degrees F for high-heat applications
• Low compression set for sustained sealing performance over time
• Low gas permeability makes it suitable for vacuum service
• Shore A hardness of 75 rated Hard for reliable sealing under pressure
• Sold in a 10-piece package to support service calls and preventive maintenance stock

Compatibility

Designed as an OEM-style replacement or service O-ring for systems requiring a Dash 132 fluoroelastomer seal, including components exposed to petroleum products, hydraulic fluids, and high operating temperatures. Not compatible with food-contact or potable-water service.

Installation Notes

O-ring replacement is typically performed by licensed HVAC technicians, plumbers, or hydraulic system technicians. Before service, shut off and relieve pressure from the system, and ensure all fluid lines are depressurized and cooled to a safe handling temperature. Inspect the groove and mating surfaces for wear, scoring, or contamination before seating the new O-ring. Do not reuse compressed or deformed O-rings, and apply a compatible lubricant only if specified by the equipment manufacturer.