Value Collection ZMSCVB75005 Viton O-ring Dash 005 100 Pack

Product Description

The VALUE COLLECTION ZMSCVB75005 is a Dash 005 Viton (fluoroelastomer) O-ring sold in a 100-piece pack. It measures 0.0937 inches inner diameter, 0.2187 inches outer diameter, and 0.0625 inches thick with a round cross section. The fluoroelastomer compound delivers a Shore A hardness of 75, a broad service temperature range of -15 to 400 degrees F, and strong resistance to petroleum-based fluids. These O-rings are installed by HVAC technicians, plumbers, and industrial mechanics wherever a reliable static or dynamic face seal or radial seal is needed in high-temperature or chemically aggressive service environments.

The ZMSCVB75005 is suited for use in residential and commercial HVAC systems, refrigeration equipment, hydraulic assemblies, fuel-handling components, and general industrial plumbing where exposure to petroleum products, oils, and elevated temperatures is common. The wide chemical compatibility and low gas permeability make this O-ring a practical choice for vacuum service applications and systems requiring minimal leakage. The brown color is standard for fluoroelastomer material and aids field identification.

Key Features

• Fluoroelastomer (Viton-type) compound resists petroleum products, fuels, and oils
• Service temperature range of -15 to 400 degrees F for high-heat environments
• Shore A hardness of 75 with a hard hardness rating for low compression set
• Low gas permeability suitable for vacuum service applications
• Round cross section, Dash 005 standard sizing for broad fitment
• Sold in a 100-piece pack with a minimum order quantity of 1 pack

Compatibility

Designed as an OEM-style replacement or service seal for components requiring a Dash 005 fluoroelastomer O-ring; compatible with petroleum products and systems operating within the -15 to 400 degrees F temperature range.

Installation Notes

O-rings of this type are installed by licensed HVAC technicians, plumbers, and qualified industrial mechanics. De-energize and depressurize the system fully before removing any fittings or valve bodies. Inspect the groove and mating surface for nicks or contamination before seating the new O-ring. Do not roll or twist the O-ring during installation, and use only lubricants compatible with fluoroelastomer compounds.