Value Collection ZMSCV70141 Viton O-ring Dash 141

Product Description

The VALUE COLLECTION ZMSCV70141 is a Dash 141 Viton (fluoroelastomer) O-ring used for static and dynamic sealing applications in plumbing, HVAC, and industrial fluid systems. It measures 2.313 inches inside diameter by 2.500 inches outside diameter with a cross-section thickness of 0.0937 inches (3/32 inches). The round cross-section profile seats reliably in standard AN dash 141 grooves. With a 70 Shore A hardness rating, this O-ring resists compression set while maintaining a consistent seal under pressure. Licensed plumbers, HVAC technicians, and industrial maintenance professionals install this part in systems where petroleum-based fluids, high temperatures, or vacuum service conditions demand a dependable elastomeric seal.

This O-ring is suited for residential and commercial applications involving petroleum products, hydraulic fluids, and high-temperature media. Its fluoroelastomer compound handles continuous operating temperatures from -15 degrees F to 400 degrees F, making it appropriate for use in hot water systems, refrigeration service valves, compressor housings, and fuel-handling assemblies. The low gas permeability characteristic also makes it a practical choice for vacuum service and sealed gas systems where minimizing leakage is critical.

Key Features

• Fluoroelastomer (Viton) compound provides wide-spectrum chemical compatibility with petroleum products and industrial fluids
• Operating temperature range of -15 degrees F to 400 degrees F supports high-heat and cold-environment installations
• 70 Shore A hardness rating delivers a hard, low-compression-set seal for long service life
• Round cross-section with 0.0937-inch thickness fits standard Dash 141 O-ring grooves
• Low gas permeability makes this O-ring suitable for vacuum service and sealed gas system applications
• Sold in a package quantity of 10 with a minimum order quantity of 1 package

Compatibility

Designed as an OEM-style replacement or service seal for any application calling for a Dash 141 fluoroelastomer O-ring with a 2.313-inch ID, 2.500-inch OD, and 0.0937-inch cross-section thickness. Compatible with petroleum-based fluids and media as noted in the product specifications.

Installation Notes

Installation should be performed by a qualified plumber, HVAC technician, or industrial mechanic following applicable codes such as the IPC or IFGC. Always depressurize and isolate the system before removing or replacing O-rings. Lubricate the O-ring with a compatible fluid or assembly lubricant before seating to prevent tearing during installation. Avoid using petroleum-incompatible greases or solvents that could degrade the fluoroelastomer compound.