Value Collection ZMSCS70114 Silicone O-ring Dash 114 100pk

Product Description

The VALUE COLLECTION ZMSCS70114 is a silicone O-ring with a round cross section, sized to Dash 114 standards. It measures 0.625 inches inside diameter, 0.813 inches outside diameter, and 0.094 inches thick. Rated at 70 Shore A hardness, this O-ring is engineered for applications that demand a wide operating temperature range, spanning -80 degrees F to 450 degrees F. It offers good dry heat resistance along with good weather and ozone resistance. Plumbers, HVAC technicians, and industrial maintenance trades use this ring where thermal cycling or outdoor exposure is a factor. This package contains 100 rings.

The ZMSCS70114 is suited for use in fluid and gas sealing applications where silicone elastomer is appropriate. Its temperature range makes it a practical choice in HVAC equipment, plumbing assemblies, and general mechanical systems exposed to elevated heat or cold environments. It demonstrates limited oil resistance and is compatible with oils, chemicals, and solvents within the constraints of silicone material. It is not FDA approved and should not be specified for food-contact applications. This ring is well suited to residential and light commercial maintenance scenarios where standard Dash 114 sizing is required.

Key Features

• Dash 114 sizing: 0.625 inches ID, 0.813 inches OD, 0.094 inches thick
• Wide temperature range: -80 degrees F to 450 degrees F
• 70 Shore A hardness with hard durometer rating
• Good weather and ozone resistance for outdoor or exposed installations
• Round cross section for standard gland seating
• Package quantity of 100 rings with a minimum order quantity of 1

Compatibility

Designed as a standard Dash 114 O-ring replacement suitable for HVAC, plumbing, and general mechanical assemblies that specify silicone elastomer seals in this size class.

Installation Notes

O-ring installation should be performed by a qualified technician following the equipment manufacturer's service procedures. De-energize or depressurize the system before replacing any seal. Inspect the gland groove for nicks or debris before seating the new ring. Avoid using petroleum-based lubricants with silicone O-rings; use a compatible silicone-based assembly lubricant where lubrication is required.