Value Collection ZMSCH70FDA134 O-ring Dash 134 Nbr Fda

Product Description

The VALUE COLLECTION ZMSCH70FDA134 is a Dash 134 O-ring manufactured from white Nitrile Butadiene Rubber (NBR), also known as BUNA-N, the most widely used elastomer in sealing applications. This round cross-section O-ring measures 1.862 inches inside diameter and 2.063 inches outside diameter with a 0.0937-inch (3/32 inch) thickness. It carries FDA approval and meets SAE and MIL-Spec standards, making it suitable for both food-grade and general industrial sealing tasks. Licensed plumbers, HVAC technicians, and industrial maintenance professionals install this part where a reliable static or dynamic seal is required against petroleum-based media.

This O-ring is well suited for use in plumbing fittings, hydraulic systems, pneumatic assemblies, fuel handling equipment, and HVAC refrigerant or oil circuits where petroleum product compatibility is required. With a hardness rating of 70 Shore A, it provides excellent compression set resistance along with strong tear and abrasion resistance. The FDA-approved white NBR compound makes it an option in light food-processing or sanitary-equipment applications as well. Each purchase includes a package quantity of 10 O-rings.

Key Features

• FDA-approved white Nitrile Butadiene Rubber (BUNA-N) compound
• Meets SAE and MIL-Spec standards
• Excellent resistance to petroleum products, oils, and fuels
• Operating temperature range of -40 degrees F to 250 degrees F
• 70 Shore A hardness with strong compression set, tear, and abrasion resistance
• Round cross-section profile for consistent seating in standard O-ring grooves

Compatibility

Compatible with petroleum products and suitable for use in systems requiring FDA-compliant sealing materials. Should not be used with ozone-generating environments, direct sunlight exposure, or stored near motors or other electrical equipment that may produce ozone.

Installation Notes

Installation should be performed by a qualified plumber, HVAC technician, or industrial maintenance professional following applicable codes such as IPC or IFGC. Always depressurize, de-energize, and drain the system before removing or installing O-rings. Lubricate the O-ring with a compatible petroleum-based or system-appropriate lubricant during installation to prevent tearing and ensure proper seating. Do not stretch the O-ring beyond its natural elasticity or use tools that may nick or cut the sealing surface.