Value Collection ZMSCE70006 Epdm O-ring Dash 006 100-pack

Product Description

The VALUE COLLECTION ZMSCE70006 is an EPDM O-ring with a round cross section, sized at 0.125 inches inside diameter, 0.250 inches outside diameter, and 0.0625 inches thick. It carries a Dash 006 designation and a durometer hardness of 70, placing it in the hard hardness range. EPDM compound gives this O-ring broad thermal capability, rated from -65 degrees F to 300 degrees F, making it suitable for hot water, steam, and phosphate ester hydraulic fluid applications. Plumbers, HVAC technicians, and industrial maintenance professionals install this size of O-ring as a sealing element in fittings, valves, and fluid-system connections. Each order ships in a package quantity of 100 pieces.

This O-ring is used in residential and commercial plumbing, HVAC hydronic systems, and industrial fluid-handling equipment where a small-diameter, chemically resistant seal is required. It is specifically noted for excellent resistance to Skydrol fluids used in commercial aircraft hydraulic systems, and is also recommended for hot water, steam, and phosphate ester type hydraulic fluids. The 1/16-inch thickness and 1/8-inch ID make it appropriate for compact fittings and valve stems where space is tight and a reliable seal under thermal cycling is critical.

Key Features

• EPDM compound rated from -65 degrees F to 300 degrees F for hot water and steam service
• Dash 006 designation: 0.125 inches ID, 0.250 inches OD, 0.0625 inches thick
• Durometer hardness of 70 (hard rating) for reliable compression sealing
• Round cross section for consistent groove fit in standard O-ring glands
• Resistant to Skydrol hydraulic fluids, phosphate ester fluids, hot water, and steam
• Sold in a 100-piece package, minimum order quantity of 1 package

Compatibility

Compatible with hot water, steam, and phosphate ester type hydraulic fluid systems. Also suitable for Skydrol fluid applications in commercial aircraft hydraulic systems. Designed to fit standard Dash 006 O-ring glands in plumbing, HVAC, and industrial fluid-handling assemblies.

Installation Notes

O-ring installation should be performed by a qualified plumber, HVAC technician, or maintenance professional with the system fully depressurized and drained before service. Inspect the gland seat for scoring or debris before seating the new O-ring to avoid damaging the sealing surface. Do not use petroleum-based lubricants with EPDM O-rings, as they will cause the compound to swell and degrade; use a compatible silicone or water-based lubricant if lubrication is needed during installation. Verify Dash 006 gland dimensions match before installation to ensure proper compression and seal integrity.