Value Collection ZBD9500-215 Viton O-ring Dash 215

Product Description

The VALUE COLLECTION ZBD9500-215 is a Dash 215 Viton O-ring designed for sealing applications that demand resistance to elevated temperatures and chemical exposure. Featuring a 1.06-inch inside diameter, a 1.31-inch outside diameter, and a 0.125-inch cross-section thickness, this O-ring uses a round cross-section profile for consistent seating in standard grooves. The Viton compound provides reliable performance across a working temperature range of -15 degrees F to 400 degrees F, making it well suited for demanding fluid and gas sealing applications. A hardness rating of 75 Shore A classifies this part as hard durometer, appropriate for higher-pressure sealing environments. HVAC technicians, plumbers, and industrial maintenance professionals regularly specify Viton O-rings in this size class.

This O-ring is used in hydraulic, pneumatic, refrigeration, fuel, and chemical fluid systems where standard Buna-N compounds are insufficient. It fits standard Dash 215 O-ring grooves per industry sizing conventions. Typical installation locations include valve stems, pump housings, compressor fittings, and threaded port connections that see elevated temperatures or aggressive fluids. Minimum order quantity is 25 pieces; package quantity is 1.

Key Features

• Viton (FKM) compound resists fuels, oils, solvents, and high-temperature fluids
• Working temperature range of -15 degrees F to 400 degrees F
• 75 Shore A hardness for higher-pressure sealing environments
• Round cross-section profile for reliable groove seating
• Dash 215 sizing per standard O-ring dash numbering convention
• Not FDA approved — intended for industrial and mechanical applications

Compatibility

Designed as a standard Dash 215 replacement O-ring fitting any application or groove machined to the Dash 215 O-ring specification with a 1.06-inch inside diameter and 0.125-inch cross-section thickness.

Installation Notes

Installation is performed by licensed technicians or qualified maintenance professionals depending on the host system. Always depressurize and de-energize the system before removing the old O-ring and seating the replacement. Inspect the groove for nicks or corrosion before installation, and apply a compatible lubricant to the O-ring to ease seating and reduce the risk of pinching or twisting. Do not use petroleum-based lubricants with Viton compounds in fuel system applications unless the lubricant is confirmed compatible.