Value Collection ZBD9500-009 Viton O-ring Dash 009

Product Description

The VALUE COLLECTION ZBD9500-009 is a Dash 009 Viton O-ring used to create reliable seals in fluid and gas systems across HVAC, plumbing, and industrial applications. Manufactured from Viton (fluoroelastomer), this O-ring measures 0.219 inches inside diameter, 0.343 inches outside diameter, and 0.0625 inches thick with a round cross section. The Viton compound provides strong resistance to petroleum-based fluids, hydraulic oils, and elevated operating temperatures, making it a dependable choice where standard nitrile or EPDM materials fall short. A hardness rating of 75 Shore A supports consistent compression and long-term sealing performance under pressure.

This O-ring is suited for use in residential and light commercial HVAC systems, refrigeration equipment, plumbing fittings, and hydraulic or pneumatic assemblies. The Dash 009 sizing is a recognized standard dimension used in a wide range of valves, fittings, connectors, and service ports. HVAC technicians, plumbers, and equipment service professionals commonly use this size during valve rebuilds, fitting repairs, and system servicing where a heat- and chemical-resistant seal is required.

Key Features

• Viton (fluoroelastomer) material for resistance to heat, oils, and chemicals
• Round cross section for uniform sealing contact and consistent compression
• 0.219 inches ID x 0.343 inches OD x 0.0625 inches thick — standard Dash 009 dimensions
• Rated for service from -15 degrees F to 400 degrees F
• 75 Shore A hardness for firm, stable seating under pressure
• Minimum order quantity of 25 units supports shop stock and service fleet use

Compatibility

Designed as a standard Dash 009 replacement O-ring for valves, fittings, and service ports that specify a Viton seal in this dimension class.

Installation Notes

O-rings in this size class are installed by HVAC technicians, plumbers, and mechanical service professionals. Always relieve system pressure and shut off fluid or gas supply before replacing any O-ring. Lightly lubricate the O-ring with a compatible lubricant before seating to prevent tearing during assembly. Do not roll or twist the O-ring into the groove — seat it flat to ensure uniform contact and a leak-free seal.