Value Collection XNB03090 Black Pipe Nipple 3/8 in X 9 in Sch 80

Product Description

The VALUE COLLECTION XNB03090 is a Schedule 80 black steel pipe nipple designed for use in piping systems that require higher pressure ratings and greater wall thickness than standard Schedule 40 fittings. Measuring 3/8 inch nominal diameter by 9 inches in length, this nipple is constructed seamlessly and conforms to ASTM A106 and ASTM A53 material standards. It carries a lead-free designation and meets ANSI B1.20.1 and ASME B1.20.1 threading standards, making it suitable for use in systems where compliance with recognized industry codes is required. Plumbers, pipefitters, and mechanical contractors are the primary installers.

This nipple is suited for residential and commercial plumbing, steam, and gas distribution piping applications where Schedule 80 wall thickness is specified. Its 3/8 inch nominal size fits standard NPT-threaded fittings and valves. The 9 inch length provides a useful extension for connecting components with greater face-to-face spacing. It is commonly used in boiler rooms, mechanical rooms, and industrial piping runs where elevated pressure or temperature conditions are present.

Key Features

• Schedule 80 wall thickness for higher pressure and temperature service compared to Schedule 40
• Seamless construction per ASTM A106 and ASTM A53 for consistent wall integrity
• NPT threads conform to ANSI B1.20.1 and ASME B1.20.1 standards
• Lead-free designation supports use in applicable potable water and mechanical systems
• Black steel finish suitable for steam, gas, and hydronic piping systems

Compatibility

Designed as a standard NPT-threaded Schedule 80 black steel pipe nipple compatible with 3/8 inch NPT fittings, valves, and couplings used in plumbing, steam, and gas piping systems.

Installation Notes

Installation should be performed by a licensed plumber or pipefitter in accordance with applicable local mechanical and plumbing codes. Shut off and depressurize the system completely before removing or installing any threaded pipe components. Apply an appropriate thread sealant or PTFE tape to NPT threads before assembly, and tighten using pipe wrenches sized for the fitting. Do not over-tighten threaded connections, as this can crack fittings or distort threads.