Value Collection WS-PL-SCB200005 Cartridge Filter 5 Micron

Product Description

The VALUE COLLECTION WS-PL-SCB200005 is a melt-blown, thermally bonded polypropylene cartridge filter designed for residential and light commercial plumbing filtration systems. Rated at 5 microns, it captures fine sediment particles that would otherwise pass through coarser media. The filter measures 20 inches in length with a 2.48-inch outside diameter, fitting standard 2-1/2 inch OD filter housings. It handles system pressures up to 60 psi and flow rates up to 8.00 GPM, making it suitable for whole-house sediment filtration and point-of-entry applications. Plumbers and water treatment technicians are the primary installers of this type of filter.

This cartridge filter is well suited for whole-house sediment reduction in residential water supply lines, as well as light commercial water treatment setups where consistent flow and pressure are required. It performs effectively in cold and warm water lines, rated up to 176 degrees F, covering a wide range of service water temperatures. Typical installations include pre-filtration stages ahead of water softeners, water heaters, or reverse osmosis systems where protecting downstream equipment from sediment loading is a priority.

Key Features

• 5-micron rating captures fine sediment including silt, rust, and scale particles
• Melt-blown and thermally bonded polypropylene construction — no binders or adhesives that can leach
• Rated up to 60 psi maximum operating pressure
• Maximum flow rate of 8.00 GPM suits residential and light commercial demand
• Rated for water temperatures up to 176 degrees F
• Both core and media are polypropylene for chemical compatibility with potable water systems

Compatibility

Designed as an OEM-style replacement or standard drop-in cartridge for plumbing filter housings that accept a 2-1/2 inch OD, 20-inch length sediment cartridge.

Installation Notes

Installation is typically performed by a licensed plumber or water treatment technician. Shut off the water supply and relieve system pressure before opening the filter housing. Follow all applicable plumbing codes, including IPC guidelines, for potable water filtration components. Do not exceed the rated 60 psi operating pressure or 176 degrees F temperature limit, and replace the cartridge on a schedule based on local water quality and pressure drop across the housing.