Value Collection WS-PL-0987030PP 30 Micron Cartridge Filter

Product Description

The VALUE COLLECTION WS-PL-0987030PP is a string-wound polypropylene cartridge filter rated at 30 microns, designed to reduce sediment in residential and light commercial plumbing systems. It measures 9-7/8 inches in length with an outside diameter of 2-1/2 inches and handles a maximum flow rate of 10.00 GPM. The polypropylene media and core construction resist moisture and common water-treatment chemicals. Licensed plumbers and water-treatment technicians install this filter into standard housing assemblies as part of point-of-entry or point-of-use filtration systems.

This cartridge is suited for residential water supply lines, light commercial plumbing applications, and irrigation pre-filtration where sediment reduction is required. The 30-micron rating targets coarse particulate such as sand, rust, and scale. It is intended for installation in standard 10-inch filter housings compatible with 2-1/2-inch OD cartridges. Maximum operating temperature is rated at 140 degrees F, making it appropriate for cold and warm water service lines.

Key Features

• 30-micron rating reduces sediment including sand, rust, and scale particles
• String-wound polypropylene media construction for consistent filtration depth
• Polypropylene plastic core resists corrosion and moisture degradation
• Maximum flow rate of 10.00 GPM supports residential and light commercial demand
• Rated to 140 degrees F for use on cold and warm water lines
• Outside diameter of 2-1/2 inches fits standard 10-inch filter housings

Compatibility

Designed as a direct-fit replacement cartridge for standard 10-inch plumbing filter housings that accept 2-1/2-inch OD, 9-7/8-inch cartridges in residential and light commercial sediment filtration applications.

Installation Notes

Installation is typically performed by a licensed plumber or qualified water-treatment technician. Shut off the water supply and relieve system pressure before opening the filter housing. Hand-tighten the housing sump per the housing manufacturer instructions and avoid over-torquing, which can damage housing threads. Replace the cartridge at recommended service intervals or when pressure drop across the filter exceeds acceptable limits for the system.