Value Collection WS-MH-WIRE-151 Aircraft Cable 100 Ft 1/8 in

Product Description

The VALUE COLLECTION WS-MH-WIRE-151 is a 100-foot length of 1/8-inch diameter aircraft cable constructed from grade 316 stainless steel with a 7 x 19 strand core configuration. This cable delivers a rated breaking strength of 1,780 pounds, making it suitable for overhead lifting, rigging, safety restraint, and tensioning applications in industrial and commercial environments. The 7 x 19 construction — seven strands of nineteen wires each — provides a balance of flexibility and tensile strength that holds up under repeated movement and cyclic loading. Licensed contractors, riggers, and maintenance technicians working in corrosive or marine-adjacent environments commonly select grade 316 stainless for its resistance to chloride and oxidation.

This aircraft cable is used across a range of trade and industrial applications including wire rope assemblies, cable railing systems, fall arrest anchoring, mechanical linkages, and equipment safety tethers. The grade 316 stainless steel finish makes it especially well suited for exterior installations, coastal environments, pool and aquatic facilities, and food-processing or chemical-exposure settings where grade 304 stainless would be insufficient. At 100 feet per coil, it provides enough length for most single-run cable railing or rigging jobs without splicing.

Key Features

• 1,780-pound rated breaking strength supports lifting, rigging, and safety restraint loads
• 7 x 19 strand core construction balances flexibility with high tensile performance
• Grade 316 stainless steel resists corrosion in marine, chemical, and wet environments
• 1/8-inch diameter fits standard swage fittings, cable clamps, and thimbles designed for that size
• 100-foot continuous length minimizes mid-run splices on single-run installations

Compatibility

Designed as a standard 1/8-inch diameter, 7 x 19 strand aircraft cable compatible with swage fittings, cable clamps, turnbuckles, and thimbles sized for 1/8-inch wire rope.

Installation Notes

Installation should be performed by a qualified rigger, contractor, or maintenance technician familiar with wire rope hardware and applicable load ratings. Always de-energize or de-load any system before replacing or re-routing cable runs. Use proper swaging tools or cable clamps rated for 1/8-inch wire rope — do not substitute undersized hardware. Consult OSHA 1926 Subpart R and applicable local codes for overhead rigging and fall protection applications.