Value Collection WS-MH-WIRE-115 Aircraft Cable 4200 Lb

Product Description

The VALUE COLLECTION WS-MH-WIRE-115 is a galvanized aircraft cable with a 3/16 inch bare diameter and a 1/4 inch overall diameter including vinyl coating. Constructed with a 7 x 19 strand core configuration, it delivers a rated breaking strength of 4,200 pounds. The galvanized steel strands provide corrosion resistance, and the vinyl coating adds a layer of abrasion and weather protection. This cable is suited for rigging, lifting, tensioning, and safety-line applications in commercial and industrial environments. Installation is typically performed by maintenance technicians, riggers, or contractors working with cable assemblies, swaged fittings, or mechanical clamps.

This aircraft cable is appropriate for a wide range of applications including overhead rigging, cable railings, tension systems, tie-down assemblies, and light lifting setups. The flexible 7 x 19 strand construction allows the cable to bend around sheaves and through pulleys more readily than lower-strand-count configurations, making it a common choice where routing around corners or through guides is required. It is used in both residential and commercial construction, maintenance, and general industrial settings.

Key Features

• 4,200 pound breaking strength for demanding rigging and tensioning work
• 7 x 19 strand core construction provides flexibility and fatigue resistance
• Galvanized finish resists corrosion in outdoor and high-humidity environments
• Vinyl coating adds abrasion protection and increases overall diameter to 1/4 inch
• 3/16 inch bare diameter fits standard cable fittings, clamps, and ferrules sized for that dimension

Compatibility

Designed as a general-purpose galvanized vinyl-coated aircraft cable compatible with standard 3/16 inch cable hardware including swage fittings, wire rope clips, thimbles, and turnbuckles rated for 3/16 inch wire rope.

Installation Notes

Installation should be performed by a qualified rigger, contractor, or maintenance technician familiar with wire rope assemblies and applicable load ratings. Always de-tension and secure any load before cutting or terminating cable. Use properly rated end fittings, swage sleeves, or wire rope clips torqued per the fitting manufacturer specifications. Inspect the cable for kinks, broken strands, or corrosion before placing in service, and do not exceed the rated breaking strength under dynamic or shock-load conditions.