Value Collection WS-MH-WIRE-095 Aircraft Cable 1/4 in

Product Description

The VALUE COLLECTION WS-MH-WIRE-095 is a 1/4-inch diameter stainless steel aircraft cable rated to 6,400 pounds breaking strength. Constructed with a 7 x 19 strand core configuration, this cable delivers flexibility and tensile strength suited to rigging, lifting, and securing applications across industrial and commercial environments. The uncoated stainless steel finish provides corrosion resistance without added coatings. It is sold in 1-foot increments from a 1,000-foot coil, with a minimum order quantity of 50 feet, making it practical for trade buyers who need a specific cut length rather than a full spool.

This aircraft cable is appropriate for applications in mechanical, structural, and facilities trade work where a flexible, high-strength wire rope solution is required. Typical uses include tension rigging, safety restraints, overhead hanging systems, and general wire rope applications in commercial or industrial settings. The 7 x 19 strand construction provides greater flexibility than 7 x 7 configurations, making it well-suited for applications involving sheaves, pulleys, or tight routing paths. Licensed contractors and facilities maintenance professionals are the primary installers.

Key Features

• 6,400-pound breaking strength for high-load rigging and securing applications
• 7 x 19 strand core construction provides superior flexibility for routed or pulley-based installations
• Stainless steel finish with no additional coating for inherent corrosion resistance
• 1/4-inch bare diameter — a common size for commercial rigging hardware and fittings
• Sold in 1-foot increments from a 1,000-foot coil, minimum order 50 feet

Compatibility

Designed as a general-purpose 1/4-inch aircraft cable compatible with standard wire rope fittings, ferrules, swage terminals, and rigging hardware sized for 1/4-inch diameter cable.

Installation Notes

Installation should be performed by qualified riggers or licensed contractors following applicable OSHA rigging standards and local building codes. Always de-energize or unload the rigging system before cutting or terminating cable ends. Use proper wire rope cutters to avoid fraying the strand core, and apply appropriate swage fittings or clamps rated for 1/4-inch cable at the specified working load. Do not use this cable beyond its rated breaking strength, and apply a suitable safety factor for the intended load application.