Value Collection WS-MH-WIRE-003 Aircraft Cable 1/16 in

Product Description

The VALUE COLLECTION WS-MH-WIRE-003 is a 1/16-inch diameter galvanized aircraft cable constructed in a 1x19 single-strand configuration. This wire rope is designed for tension and suspension applications where a thin, high-strength line is required. The 1x19 lay provides a stiff, low-stretch cable that holds its form well under load, making it well suited for control runs, guard rail infill, rigging, and mechanical linkage applications. The galvanized finish provides corrosion resistance for both indoor and outdoor use. The coil contains 1,000 total feet of cable, sold in 1-foot increments with a minimum order quantity of 100 feet.

This aircraft cable is used across a range of commercial and residential applications including deck and stair cable railing systems, marine rigging, mechanical control cable assemblies, and overhead suspension rigging. The small 1/16-inch diameter allows it to route through tight spaces and small fittings. The 500-pound breaking strength makes it appropriate for light-duty tension applications. It is commonly installed by riggers, maintenance technicians, contractors, and marine service professionals.

Key Features

• 1/16-inch diameter — compact profile for tight fittings and small swage terminals
• 500-pound breaking strength for light-duty tension and suspension use
• 1x19 single-strand construction offers low stretch and high stiffness under load
• Galvanized finish resists corrosion in outdoor and marine environments
• 1,000-foot total coil length sold in 1-foot increments
• Minimum order quantity of 100 feet per order

Compatibility

Designed as a standard 1/16-inch 1x19 galvanized aircraft cable for use with swage fittings, cable rail hardware, and rigging terminals sized for 1/16-inch wire rope.

Installation Notes

Installation of aircraft cable typically requires swaging tools, cable cutters rated for wire rope, and appropriately sized end fittings such as swage sleeves or thimbles. Always relieve any load from an existing cable run before cutting or terminating. Follow applicable structural and rigging standards when using this cable in load-bearing or safety-critical assemblies. Use the published 500-pound breaking strength as a maximum limit and apply an appropriate safety factor for the intended application.