Value Collection WS-MH-CHN-107 Alloy Chain Grade 80 100 Ft

Product Description

The VALUE COLLECTION WS-MH-CHN-107 is a Grade 80 welded alloy chain designed for heavy lifting and load-securing applications across industrial and trade environments. This chain carries a 28,300 lb work load limit and ships as a 100-foot coil, priced and cut in 1-foot increments with a minimum order of 10 feet. The black cataphoresis finish provides corrosion resistance suitable for demanding job-site conditions. Links measure 1.024 inches inside width and 2.244 inches inside length. Rigging crews, millwrights, and industrial contractors specify Grade 80 alloy chain for overhead lifting and load binding where high tensile strength is required.

This chain is suited for overhead lifting slings, load binders, chain hoists, and material handling assemblies in construction, manufacturing, and heavy industrial settings. The 100-foot coil length allows field cutting to custom sling or tie-down lengths. The cataphoresis finish is appropriate for both indoor and outdoor use where moderate environmental exposure is expected. Licensed riggers and qualified personnel should determine sling configuration and working load limits based on applicable ASME B30.9 standards and the specific lift angle before use.

Key Features

• Grade 80 alloy steel construction with a 28,300 lb work load limit
• Black cataphoresis finish for corrosion resistance in industrial environments
• 1.024-inch inside width and 2.244-inch inside length per link
• 100-foot total coil length, priced in 1-foot increments
• Welded links for structural integrity under dynamic and static loads
• Minimum order quantity of 10 feet per transaction

Compatibility

Designed as a standard Grade 80 alloy chain suitable for use with compatible Grade 80 hooks, shackles, master links, and chain hoist components rated to match or exceed the 28,300 lb work load limit of this chain.

Installation Notes

Installation and rigging should be performed by a qualified rigger or licensed professional in accordance with ASME B30.9 and applicable OSHA regulations. Inspect all chain links, end fittings, and connecting hardware for wear, deformation, or damage before each use. Never exceed the rated work load limit, and always account for sling angle reduction factors when configuring lifting assemblies. De-energize or isolate any powered equipment before attaching or removing chain from load points.