Value Collection WS-MH-CHN-043 Proof Coil Chain 92 Ft

Product Description

The VALUE COLLECTION WS-MH-CHN-043 is a Grade 30 welded proof coil chain rated for a working load capacity of 1,900 pounds. Constructed from zinc-plated steel, this chain resists corrosion in general-purpose indoor and outdoor environments. At 92 feet in length with a 5/16-inch nominal diameter, it provides a substantial run suitable for towing, load securement, logging, agriculture, and general rigging tasks. Grade 30 proof coil chain is a foundational utility chain widely used across construction, marine, and agricultural industries. The zinc-plated finish offers a baseline level of rust resistance for moderate-exposure applications.

This chain is suited for general-purpose load securement, towing setups, farm and ranch applications, light rigging, and equipment tie-down. The 92-foot continuous length allows the chain to be cut to site-specific requirements or used in full for longer span applications. With an inside width of 0.598 inches and an inside length of 1.272 inches per link, the chain is compatible with standard Grade 30 hooks, shackles, and binders designed for 5/16-inch proof coil chain. Typical users include contractors, fleet operators, farmers, and general tradespeople.

Key Features

• 1,900 lb working load capacity for general-purpose towing and securement
• Grade 30 proof coil construction meets standard utility chain specifications
• Zinc-plated steel finish provides moderate corrosion resistance
• 92-foot length delivers versatility for a wide range of job-site applications
• Inside link width of 0.598 inches and inside link length of 1.272 inches for standard hardware compatibility
• Welded links for consistent load distribution along the chain run

Compatibility

Designed for use with standard Grade 30 chain hardware including hooks, binders, and shackles sized for 5/16-inch proof coil chain. Compatible with typical DOT-approved load binders used in flatbed and trailer tie-down applications where Grade 30 chain is acceptable.

Installation Notes

Inspect each link for deformation, cracks, or corrosion before placing the chain in service. Do not exceed the rated working load capacity of 1,900 pounds. When cutting to length, use appropriate chain-cutting tools and deburr any cut ends before attaching hardware. Follow applicable ASME B30.9 sling and rigging standards and any applicable DOT securement regulations when using this chain for cargo tie-down.