Value Collection WS-MH-CHN-013 Proof Coil Chain 3/16 in

Product Description

The VALUE COLLECTION WS-MH-CHN-013 is a Grade 30 welded proof coil chain sold in 1-foot increments from a 500-foot coil. Each link is welded and proof-tested to confirm structural integrity before leaving the factory. The chain carries a working load capacity of 800 pounds and features a self-colored finish, meaning it receives no additional coating after manufacture. At 3/16 inches in wire diameter, this chain is suited for general-purpose utility, towing, load securement, and light rigging applications. Contractors, maintenance techs, and fleet service professionals who need to cut custom lengths on the job will find the per-foot pricing structure practical for minimizing waste.

This proof coil chain is intended for general industrial and trade use where a standardized Grade 30 chain meets the load requirement. Typical applications include securing equipment on trailers, blocking access gates, bundling materials on job sites, and use as a utility restraint in light construction or maintenance scenarios. The 500-foot coil allows bulk purchase and field cutting to exact lengths. A minimum order quantity of 25 feet applies.

Key Features

• Grade 30 proof coil construction with welded links for verified strength
• 800-pound working load capacity suitable for general utility and light securement
• 3/16-inch wire diameter with 0.977-inch inside length and 0.413-inch inside width per link
• Self-colored finish — no additional coating, suitable for environments where paint or zinc may interfere
• Sold in 1-foot increments from a 500-foot coil, allowing custom-length purchasing
• Minimum order quantity of 25 feet per transaction

Compatibility

Designed as a general-purpose Grade 30 proof coil chain compatible with standard 3/16-inch chain hooks, grab hooks, and connecting links rated for Grade 30 chain.

Installation Notes

Cutting to length requires a cold chisel and hammer or an angle grinder with a cutoff wheel — never use heat cutting, as it alters the metallurgical properties of the link. Always verify that all connecting hardware — hooks, shackles, and connecting links — is rated at or above the chain working load before use. Never exceed the rated 800-pound working load capacity, and inspect each link for deformation, cracks, or weld defects before each use.