Value Collection WFR-1062 Air Ratchet 1/4 in Drive

Product Description

The VALUE COLLECTION WFR-1062 is a 1/4 inch drive pneumatic air ratchet designed for fastening and loosening bolts in tight spaces where a standard ratchet cannot generate enough speed. It delivers 3 to 18 ft/lb of torque at 240 RPM and operates at a rated air pressure of 90 psi with an air consumption of 3 CFM. The inline handle design keeps the tool compact and maneuverable in confined work areas. At 1.16 pounds, it is light enough for extended overhead or under-dash use. A 1/4 inch NPT inlet connects directly to standard shop air supply lines. This tool is installed and used by HVAC technicians, automotive service technicians, and general maintenance trades.

The WFR-1062 is suited for light-duty fastening tasks in residential and commercial service environments. Typical applications include equipment panel removal, ductwork hardware, access door fasteners, and similar work where bolt sizes stay at 1/4 inch capacity and torque demands fall within the 3 to 18 ft/lb range. The 6 inch overall length allows access in recessed cavities and around obstructions where larger air ratchets cannot reach. The rear exhaust vents away from the work surface, reducing debris disturbance at the fastener location.

Key Features

• 1/4 inch drive accepts standard sockets for light fastening work
• 3 to 18 ft/lb torque range covers common small-fastener applications
• 240 RPM free speed allows quick bolt engagement and removal
• Inline handle at 6 inches overall length suits confined-space access
• Rear exhaust location directs spent air away from the work area
• Requires only 1/4 inch minimum hose size and 90 psi shop air supply

Compatibility

Designed as a general-purpose 1/4 inch drive pneumatic ratchet compatible with any standard shop air compressor system supplying 90 psi through a 1/4 inch NPT fitting and minimum 1/4 inch air hose.

Installation Notes

Connection and use of this tool should follow standard compressed-air safety practices. Ensure the air supply is regulated to 90 psi and the line is drained of moisture before connecting. Use a 1/4 inch NPT quick-connect fitting and a minimum 1/4 inch inside-diameter air hose to maintain adequate CFM delivery. Disconnect the air supply before changing sockets or performing any service on the tool.