Value Collection VC-PT-0204RNSSG Needle Scaler 3200 Bpm

Product Description

The VALUE COLLECTION VC-PT-0204RNSSG is an air-powered pistol grip needle scaler designed for surface preparation work including rust removal, mill scale stripping, and weld spatter cleanup. It operates at 3,200 beats per minute (BPM) and requires a 90 psi air supply consuming 4 CFM. The tool connects via a 1/4 inch inlet and accepts needles with a 1/8 inch diameter and 180mm length. The pistol grip configuration gives the operator controlled, single-hand access to tight spaces on structural steel, pipe, and fabricated assemblies. Weighing 5.07 pounds, it is a practical handheld option for maintenance and fabrication shops.

This needle scaler is suited for metal fabrication, shipyard, pipeline, and general industrial maintenance applications. Typical use cases include preparing steel surfaces before painting or coating, removing corrosion from weld joints, and cleaning castings or structural members. The tool is commonly used by ironworkers, pipefitters, and maintenance welders working on both new construction and repair work. It connects to a standard compressed air supply and is sized for jobs where controlled, localized scaling is needed.

Key Features

• 3,200 BPM operating speed for aggressive surface prep and scaling
• 90 psi working pressure with 4 CFM air consumption
• 1/4 inch NPT air inlet compatible with standard shop air fittings
• 1/8 inch diameter needle with 180mm length for detailed reach
• 1-7/8 inch stroke delivers consistent impact energy per cycle
• Pistol grip design allows single-hand operation and directional control

Compatibility

Designed as a standard pneumatic needle scaler accepting 1/8 inch diameter, 180mm length needles commonly available for air-powered scaling tools.

Installation Notes

A licensed or experienced pneumatic tool technician should verify that the air supply line is rated for at least 90 psi before connecting. Always bleed the air line and depressurize the system before changing needles or performing any maintenance on the tool. Use appropriate thread sealant on the 1/4 inch inlet connection and confirm all fittings are secured before operating. Wear ANSI-rated eye protection and hearing protection during use, as needle scalers generate significant noise and debris.