Value Collection UCT20620ES6PL Take Up Unit 1-1/4 in Id

Product Description

The VALUE COLLECTION UCT20620ES6PL is a take up unit bearing designed to support and tension conveyor belts, drive chains, and similar linear power-transmission assemblies. It features a 1-1/4 inch inner diameter bore, an overall length of 1-1/2 inches, and an overall height of 4-1/32 inches. The unit is rated for a static load capacity of 2,540 pounds and a dynamic load capacity of 4,383 pounds. The housing is constructed from SM thermoplastic, making it suitable for applications where corrosion resistance or weight reduction is a priority. Maintenance technicians and millwrights are the typical installers.

This take up unit is used in industrial and light commercial conveyor systems, packaging lines, and material handling equipment where shaft alignment and belt tension must be maintained over time. The take up design allows for adjustment along a mounting slot or frame channel, compensating for belt stretch and wear. It is appropriate for moderate-load linear motion applications where a thermoplastic housing is acceptable in place of cast iron or steel alternatives.

Key Features

• 1-1/4 inch bore ID for direct shaft mounting
• Static load capacity of 2,540 pounds
• Dynamic load capacity of 4,383 pounds
• SM thermoplastic housing for corrosion resistance and reduced weight
• Overall height of 4-1/32 inches suits standard conveyor frame slots
• Compact 1-1/2 inch overall length minimizes space requirements

Compatibility

Designed as a standard take up unit replacement for industrial conveyor and power-transmission systems requiring a 1-1/4 inch bore with thermoplastic housing construction.

Installation Notes

Installation should be performed by a qualified millwright or maintenance technician. De-energize and lock out all drive motors and conveyor systems before beginning any bearing or take up unit service. Ensure the mounting frame slot is clean and free of debris before positioning the unit, and verify shaft alignment before final tightening. Do not exceed the rated static or dynamic load capacities for the selected mounting configuration.