Value Collection TT/10 Tilting Table 15x10x6.5 in 88 Lb

Product Description

The VALUE COLLECTION TT/10 is a precision tilting table designed for use in machining, milling, and grinding operations where angular workpiece positioning is required. The table tilts from -45 to 45 degrees, allowing operators to machine compound angles and beveled features without repositioning fixturing. Built to handle loads up to 88 pounds, it suits medium-duty metalworking applications. The table measures 15 inches in length, 10 inches in overall width, and 6.5 inches in overall height, making it compatible with a range of knee mills and surface grinders. T-slots measuring 9/16 inches wide accept standard clamping hardware for secure workpiece fixturing.

This tilting table is intended for use in machine shop environments, both production and toolroom settings. It installs directly onto the table of a vertical or horizontal milling machine, surface grinder, or similar equipment where a flat work surface needs to be presented at a controlled angle. The 88-pound load capacity supports a wide range of part sizes typical of general machining work. The fixed-swivel design provides rigid, repeatable angular positioning without lateral movement during cutting operations.

Key Features

• Tilt range of -45 to 45 degrees for compound angle machining
• 88-pound maximum load capacity for medium-duty workholding
• 9/16-inch T-slot width accepts standard milling clamps and strap kits
• 15 x 10-inch table surface provides ample workpiece support area
• Non-swiveling base maintains rigid lateral positioning during machining
• Overall height of 6.5 inches keeps the workpiece close to the machine spindle

Compatibility

Designed as an OEM-style replacement and general-purpose tilting table suitable for use on standard knee mills, surface grinders, and similar machine tools equipped with T-slotted work surfaces.

Installation Notes

Installation is performed by machinists or toolroom technicians. Power down and lock out the machine before mounting the tilting table to the machine table. Secure the unit using appropriately sized T-bolts and strap clamps through the T-slots of the host machine. Verify angular position with a precision protractor or angle gauge before beginning any cutting operation, and confirm all clamping hardware is fully torqued before spindle engagement.