Value Collection TSPTFE037506250 Ptfe Tube 1/4 in Id

Product Description

The VALUE COLLECTION TSPTFE037506250 is a natural white PTFE (polytetrafluoroethylene) tube used in fluid transfer, pneumatic, and chemical-handling applications across plumbing, HVAC, and industrial service work. With a 0.25-inch inside diameter and 0.375-inch outside diameter, the wall thickness measures 0.0625 inches (1/16 inch). PTFE offers broad chemical resistance, low friction, and a wide service temperature range, making it a standard choice when routing aggressive media, refrigerants, or high-purity fluids through tight spaces. The tube is sold in 1-foot increments with a 10-foot minimum cut length per order.

This tube suits residential and light commercial applications where chemical inertness and dimensional consistency are required. Common uses include refrigerant line protection sleeves, pneumatic instrument lines, chemical feed tubing in water treatment, and drain or vent routing in lab and plumbing environments. The 50-foot coil format is practical for service vans or shops that cut to length in the field. Plumbers, HVAC technicians, and industrial maintenance professionals are the typical end users.

Key Features

• PTFE construction provides broad chemical resistance and low surface friction
• 0.25-inch ID and 0.375-inch OD with a consistent 0.0625-inch wall thickness
• Natural white color allows visual inspection of media flow
• Available in 1-foot cut increments, 10-foot minimum cut length
• 50-foot total coil length per unit for field or shop use
• Shore hardness of 60 supports dimensional stability under compression fittings

Compatibility

Designed as a general-purpose PTFE tube suitable for use with standard 1/4-inch ID compression, barb, or push-to-connect fittings commonly used in plumbing, pneumatic, and fluid-handling assemblies.

Installation Notes

Cut PTFE tube with a sharp tubing cutter or razor blade to ensure a clean, square end before inserting into fittings. Verify fitting compatibility with the 0.375-inch OD before assembly, as compression fittings must match the exact outside diameter. De-energize or depressurize any system before replacing or adding tubing. Follow applicable local plumbing or mechanical codes when using this tube in potable water or pressurized systems.