Value Collection ST0230100 Chucking Reamer 1 in Hss 8 Flute

Product Description

The VALUE COLLECTION ST0230100 is a high-speed steel (HSS) chucking reamer designed to bring bored or drilled holes to a precise finished diameter. With a 1-inch cutting diameter, an 8-flute spiral configuration, and a right-hand cutting direction, this reamer delivers smooth, accurate stock removal in a single pass. The 3MT Morse taper shank mounts directly into compatible drill press spindles or lathe tailstocks without an additional chuck. The bright, uncoated finish is standard for HSS reamers used in general-purpose ferrous and non-ferrous machining. Machinists and toolroom technicians are the primary users of this tool in production and maintenance environments.

This chucking reamer is suited for production shops, maintenance toolrooms, and job-shop operations where accurate hole finishing is required on mild steel, aluminum, brass, and similar materials. The 3MT shank fits machine tools equipped with a No. 3 Morse taper spindle, including many knee mills, drill presses, and engine lathes. The 2.75-inch flute length accommodates moderate-depth hole finishing, while the 10.5-inch overall length provides clearance in typical machine setups.

Key Features

• 1.0000-inch finished cutting diameter for precise hole sizing
• 8-flute spiral geometry for smooth surface finish and reduced chatter
• Right-hand spiral, right-hand cutting direction — standard for machine reaming
• No. 3 Morse taper (3MT) shank for direct spindle mounting without a chuck
• HSS construction handles a broad range of common workpiece materials
• Bright uncoated finish — resharpenable with standard HSS grinding wheels

Compatibility

Designed for use in machine tools equipped with a No. 3 Morse taper spindle, including drill presses, knee mills, and engine lathes configured for chucking reamer operations.

Installation Notes

A licensed machinist or experienced toolroom technician should mount and operate this reamer. Power down and lock out the machine spindle before installing or removing the taper shank. Clean both the shank and spindle bore of chips and oil before seating the taper to ensure full contact and concentricity. Use appropriate cutting fluid for the workpiece material, and never exceed the recommended feed rate for the diameter and material being reamed.