Value Collection ST0130100 Chucking Reamer 1 in Hss 3MT

Product Description

The VALUE COLLECTION ST0130100 is a straight-flute chucking reamer designed to bring bored or drilled holes to precise final diameter. Built from high-speed steel (HSS) with a bright, uncoated finish, it delivers consistent sizing in ferrous and non-ferrous metals across general machining applications. The reamer features a 3MT (No. 3 Morse Taper) shank for secure seating in compatible machine spindles and tailstocks. With a 1.0000-inch cutting diameter, 2.75-inch flute length, and 10.5-inch overall length, this tool is suited for moderate-depth through-holes and blind-hole finishing operations where dimensional accuracy is critical. Licensed machinists and toolroom technicians are the primary users.

This chucking reamer is intended for use in drill presses, lathes, and machining centers equipped with a No. 3 Morse Taper socket or a suitable adapter. It is appropriate for production and job-shop environments where final hole sizing to 1.0000 inch is required. The right-hand cutting direction and 8-flute configuration produce a smooth bore finish at standard reaming feed and speed rates. It is well-suited for through-hole and moderate blind-hole applications in steel, cast iron, aluminum, and similar machinable materials.

Key Features

• 1.0000-inch cutting diameter for precise final-size hole finishing
• 8 straight flutes with right-hand cutting direction for smooth, accurate bore surfaces
• High-speed steel (HSS) construction provides durability across a range of machinable metals
• No. 3 Morse Taper (3MT) shank seats securely in standard machine spindles and tailstocks
• Bright, uncoated finish — suitable for use with standard cutting fluids
• 10.5-inch overall length accommodates moderate-depth hole applications

Compatibility

Designed as an OEM-style chucking reamer for use in any machine spindle or tailstock accepting a No. 3 Morse Taper (3MT) shank.

Installation Notes

Chucking reamers are installed and operated by machinists following standard shop safety procedures. Always power down and lock out the machine before seating or removing the taper shank. Ensure the Morse Taper socket is clean and free of chips before insertion to prevent shank damage or runout. Use an appropriate cutting fluid for the workpiece material and run the reamer at reduced spindle speed relative to the drilling operation — typically one-half to one-third of the drill speed for the same diameter.