Value Collection SM35BS02 Brown Sharpe Taper Reamer Size 2

Product Description

The VALUE COLLECTION SM35BS02 is a Brown and Sharpe taper reamer designed for precision bore finishing in metal fabrication and machining applications. Built from high speed steel with a bright finish, this straight flute reamer delivers clean, accurate taper cuts in soft to medium-hardness workpiece materials. The small end diameter measures 0.25 inches, the large end diameter measures 0.38 inches, and the overall length is 5.125 inches. The straight flute geometry and right hand cut orientation make it a standard choice for manual and machine reaming operations where controlled taper sizing is required.

This reamer is suited for use in machine shops, maintenance facilities, and toolroom environments where Brown and Sharpe taper bores must be produced or trued. The 11/32 inch shank diameter accommodates common drill press and lathe chuck sizes. A 3.125 inch flute length provides sufficient cutting engagement for through and blind taper bore applications. Machinists, tool and die makers, and maintenance technicians are the typical installers of this tool.

Key Features

• Brown and Sharpe Taper Size 2 designation for standardized taper bore fitment
• High speed steel construction resists heat and wear during reaming operations
• Straight flute geometry for smooth cutting action in most metals
• Right hand cut orientation compatible with standard machine and hand reaming setups
• Bright finish on cutting edges for reduced friction and clean bore surface quality
• Overall length of 5.125 inches with 3.125 inch flute for adequate reach and engagement

Compatibility

Designed as an OEM-style replacement or standard toolroom reamer for applications requiring a Brown and Sharpe Taper Size 2 bore profile.

Installation Notes

This tool is installed and operated by machinists and tool and die makers using a drill press, lathe, or milling machine with an appropriately sized chuck or collet. Secure the workpiece firmly before reaming and apply cutting fluid appropriate for the workpiece material to extend tool life and improve bore finish. Never force the reamer into an undersized hole — the pilot bore should be drilled close to the small end diameter before reaming. Follow applicable shop safety standards for rotating tooling.