Value Collection SM2200108 Straight Shell Reamer 1-1/8 in

Product Description

The VALUE COLLECTION SM2200108 is a straight-flute shell reamer designed to finish-ream bored or drilled holes to a precise 1.125-inch diameter. Built from high-speed steel, it delivers consistent dimensional accuracy in metal fabrication, machining, and maintenance applications. The reamer mounts on a No. 6 arbor via a 5/8-inch center hole and cuts in the right-hand direction. With an overall length of 2.75 inches, it is sized for use in standard milling machines, drill presses, and manual reaming setups. Machinists and tool-and-die workers rely on shell reamers like this one for controlled material removal during finishing passes.

This shell reamer is suited for production and job-shop environments where close-tolerance hole finishing is required in steel, cast iron, aluminum, and similar machinable materials. The straight flute geometry makes it appropriate for short-chipping materials and through-holes where chip clearance is not a limiting concern. It is installed on a compatible No. 6 shell reamer arbor before use and is driven by the arbor taper fit.

Key Features

• 1.125-inch (1-1/8 inch) finish reaming diameter for precise hole sizing
• High-speed steel construction for durability across common machinable metals
• Straight flute design suited to short-chipping materials and through-hole applications
• Right-hand cutting direction, compatible with standard spindle rotation
• 5/8-inch center hole fits No. 6 shell reamer arbor
• Compact 2.75-inch overall length for use in confined setups

Compatibility

Designed for use with a No. 6 shell reamer arbor. The 5/8-inch center hole is the standard mounting interface for this arbor size. Confirm arbor number and taper fit before installation.

Installation Notes

Shell reamers are installed by a machinist or toolroom technician — mount the reamer securely onto the correct arbor before chucking in the spindle. Power down and lock out the machine before mounting or removing the reamer. Use cutting fluid appropriate for the workpiece material to extend tool life and maintain surface finish. Never run a shell reamer in reverse, as this will damage the cutting edges.