Value Collection SM2000032 Hand Reamer 1/2 in 8 Flutes Hss

Product Description

The VALUE COLLECTION SM2000032 is a straight-shank hand reamer designed for precision hole finishing in metal and industrial materials. Built from high speed steel (HSS) with a bright uncoated finish, it delivers consistent sizing and smooth surface finishes in reamed bores. The reamer measures 0.5 inches in diameter with a 3-inch flute length and a 6-inch overall length. Eight spiral flutes with a left-hand spiral direction and right-hand cutting direction reduce chatter and improve chip evacuation during manual reaming operations. Machinists, tool and die technicians, and maintenance professionals use this reamer for hand-operated or slow-speed machine finishing work.

This hand reamer is suited for finishing through-holes and blind bores to close tolerances in ferrous and non-ferrous materials. Typical applications include precision fit work on shafts, pins, and bushings in manufacturing, maintenance, and repair settings. The straight shank accepts standard drill chucks and tap wrenches, making it straightforward to deploy in both bench and field service scenarios where powered reamers are impractical or unavailable.

Key Features

• High speed steel construction provides wear resistance and edge retention across a range of work materials
• Eight spiral flutes for reduced chatter and improved chip flow during hand reaming
• Left-hand spiral with right-hand cutting direction helps pull chips away from the finished bore surface
• Bright uncoated finish suitable for general-purpose material removal without specialty coatings
• Straight shank fits standard chucks and tap wrenches for flexible tool holding
• 0.5-inch diameter with 3-inch flute length accommodates typical pin, shaft, and bushing bore applications

Compatibility

Designed as a general-purpose hand reamer for use in standard straight-shank tool holders, tap wrenches, and slow-speed drill presses where manual or low-RPM reaming of 0.5-inch bores is required.

Installation Notes

Hand reamers are installed and operated by machinists or maintenance technicians familiar with precision hole finishing. Always secure the workpiece before reaming and apply appropriate cutting fluid to extend tool life and improve bore finish. Feed the reamer with light, steady forward pressure and consistent rotation — never reverse a reamer under cutting load, as this dulls the cutting edges. Follow applicable shop safety practices and wear eye protection during all reaming operations.