Value Collection SM1900108 Hand Reamer 1-1/8 in Hss

Product Description

The VALUE COLLECTION SM1900108 is a straight-flute hand reamer designed to finish and size drilled holes to precise tolerances. Built from high speed steel with a bright, uncoated finish, it delivers consistent cutting performance in both production and maintenance settings. The reamer measures 1-1/8 inches in diameter with a 5-13/16-inch flute length and an overall length of 11-5/8 inches. Ten flutes provide a smooth, even cut with reduced chatter. Right-hand cutting direction suits standard manual and low-speed machine reaming operations. Machinists, tool-and-die workers, and maintenance technicians use this tool wherever a close-tolerance bore finish is required.

This hand reamer is suited for finishing holes in ferrous and non-ferrous metals in general machining, maintenance, and repair applications. The straight shank allows it to be held in a tap wrench or a low-speed drill press chuck. It is appropriate for shop floor and field maintenance work where holes need to be brought to a precise diameter after rough drilling. The bright finish is compatible with standard cutting fluids used in metalworking operations.

Key Features

• 1-1/8 inch reamer diameter for finish sizing of drilled holes
• High speed steel construction for durability across ferrous and non-ferrous materials
• 10 straight flutes for smooth, chatter-resistant cutting action
• 5-13/16 inch flute length provides adequate contact for through-hole and blind-hole reaming
• Right-hand cutting direction, compatible with standard tap wrenches and low-speed chucks
• Bright, uncoated finish suitable for use with most metalworking cutting fluids

Compatibility

Designed as a general-purpose hand reamer for finishing 1-1/8 inch diameter holes in standard metalworking, maintenance, and repair applications.

Installation Notes

This reamer is installed and used by machinists and maintenance technicians working on metal components requiring close-tolerance bore finishes. Always secure the workpiece before reaming and apply an appropriate cutting fluid for the material being worked. Use a tap wrench for hand reaming or a low-speed drill press to avoid overheating the cutting edges. Do not reverse the cutting direction during operation, as this will damage the flutes.