Value Collection SM0501700 Chucking Reamer 17.00mm Hss

Product Description

The VALUE COLLECTION SM0501700 is a straight-flute chucking reamer designed to finish-ream holes to a precise 17.00 mm (0.6693 inch) diameter. Built from high-speed steel (HSS) with a bright, uncoated finish, it delivers clean, accurate bores in a wide range of ferrous and non-ferrous materials. The straight-cylindrical shank seats directly in standard drill chucks or collet holders, making it a practical choice for machine shop, toolroom, and production environments. With a 9-inch overall length and a 2.25-inch flute length, it provides adequate reach for most standard-depth reaming operations.

This chucking reamer is suited for use in drill presses, lathes, milling machines, and CNC machining centers wherever a close-tolerance finish bore is required. Right-hand cutting geometry works with conventional clockwise spindle rotation. It is a practical general-purpose reamer for machinists, toolmakers, and maintenance technicians who need a reliable HSS reamer at a standard metric diameter without special coatings or offset sizing.

Key Features

• 17.00 mm (0.6693 inch) reamer diameter for metric-spec hole finishing
• High-speed steel (HSS) construction for durability across common work materials
• Straight-flute design suitable for through-holes and shallow blind bores
• Straight-cylindrical shank for direct chuck or collet mounting
• Right-hand cutting direction compatible with standard spindle rotation
• Bright/uncoated finish — no coating buildup to affect tolerance stack

Compatibility

Designed as a general-purpose chucking reamer compatible with standard drill chucks and collet systems accepting a straight-cylindrical shank at this diameter class.

Installation Notes

Chucking reamers should be installed by a qualified machinist following shop-standard tool-holding procedures. Ensure the machine spindle is fully stopped and locked out before mounting or removing the tool. Use appropriate cutting fluid for the workpiece material to extend tool life and improve finish quality. Never use a reamer to remove excess stock — bore or drill the hole to within recommended reaming allowance before finishing with this tool.