Value Collection SM0410030 Chucking Reamer 1.003 in Hss

Product Description

The VALUE COLLECTION SM0410030 is a straight-flute chucking reamer designed to bring finish-bore holes to a precise 1.0030-inch diameter. Made from high-speed steel (HSS) with a bright, uncoated finish, it delivers consistent cutting performance on steel, cast iron, aluminum, and similar materials. The straight-cylindrical shank seats securely in standard drill chucks and machine spindles, making it a direct-mount tool for drill presses, lathes, and CNC machining centers. With an overall length of 10.5 inches and a 2.75-inch flute length, it provides adequate reach for most through-hole and blind-hole reaming applications at this diameter range. The right-hand cutting geometry is standard for conventional machine reaming operations.

This chucking reamer is suited for machine shop, toolroom, and production floor applications where a hole must be sized to a tight dimensional tolerance after drilling. Typical use cases include fitting dowel pins, bushings, and precision shafts where a drilled hole alone does not provide sufficient accuracy or surface finish. It is intended for use in stationary or CNC-controlled machine tools rather than hand-held operations. Machinists, tool-and-die makers, and maintenance technicians are the primary users of this tool.

Key Features

• 1.0030-inch reaming diameter for precision bore sizing in the 1-inch-plus range
• High-speed steel (HSS) construction resists wear during medium-duty machine reaming
• Straight flute geometry suits most ferrous and non-ferrous materials
• Bright uncoated finish — no coating thickness variables affecting final bore diameter
• Straight-cylindrical shank fits standard drill chucks and collet holders without adapters
• Right-hand cutting direction compatible with conventional forward-feed machine operation

Compatibility

Designed as a machine chucking reamer for use in drill presses, lathes, mill-drill machines, and CNC machining centers equipped with a drill chuck or straight-shank collet capable of holding a 1-inch-range cylindrical shank.

Installation Notes

A licensed machinist or trained toolroom technician should set up and operate this reamer in a properly secured machine tool. Power down and de-energize the machine spindle before mounting or removing the reamer from the chuck. Use appropriate cutting fluid for the workpiece material to extend tool life and achieve the target surface finish. Do not use this chucking reamer in a hand-held drill — it is designed for machine use only.