Value Collection SM0406170 Chucking Reamer 0.617 in Hss

Product Description

The VALUE COLLECTION SM0406170 is a chucking reamer designed to finish-ream drilled or bored holes to a precise diameter of 0.6170 inches. Built from high-speed steel (HSS) with a bright, uncoated finish, this tool delivers consistent sizing and smooth surface finish in a wide range of ferrous and non-ferrous materials. The straight flute geometry makes it well suited for through-hole applications where chip evacuation is straightforward. With an overall length of 9 inches and a flute length of 2.25 inches, it provides adequate reach for most standard workpiece thicknesses. Machinists and tool-room operators install this reamer in a drill press, lathe, or CNC machine using a standard chuck or collet.

This reamer is used in machine shop, tool-and-die, and maintenance environments where hole tolerances must be held tightly after initial drilling or boring. It is appropriate for light stock removal passes to bring a hole to final dimension. The straight-cylindrical shank allows direct mounting in a drill chuck, collet, or floating reamer holder without an adapter. Right-hand cutting direction is standard for conventional clockwise spindle rotation.

Key Features

• Precision ground to 0.6170 inches diameter for accurate final hole sizing
• High-speed steel (HSS) construction provides wear resistance across common shop materials
• Bright, uncoated finish suitable for general-purpose reaming applications
• Straight flute design promotes clean chip flow in through-hole operations
• Straight-cylindrical shank fits standard drill chucks and collets without adapters
• Right-hand cutting direction compatible with conventional spindle rotation

Compatibility

Designed as a general-purpose chucking reamer for use in drill presses, lathes, and CNC machining centers equipped with a standard chuck or collet capable of holding a straight-cylindrical shank in the 0.5000 to 0.6999 inch diameter range.

Installation Notes

This reamer is installed and operated by machinists or tool-room technicians familiar with metal-cutting practices. Power down and lock out the spindle before changing tooling. Use a floating reamer holder where possible to compensate for minor spindle misalignment and avoid bell-mouthing the hole. Run at appropriate speeds and feeds for the workpiece material, and apply cutting fluid to extend tool life and improve finish quality.