Value Collection SC01816628 Solid Dead Center 5MT

Product Description

The VALUE COLLECTION SC01816628 is a solid dead center designed for use in lathe tailstocks and machining setups requiring a fixed, non-rotating support point. Built from carbon steel with a standard 60-degree included angle point, this dead center provides a stable, rigid reference point for turning operations between centers. The shank features a No. 5 Morse Taper (5MT) for secure, self-holding fit in compatible tailstock spindles. The head and point diameter measure 1.6929 inches, and the overall length is 8 inches. At 4.3 pounds, the unit is sized for medium to large lathe applications in job shop, tool room, and production environments.

This solid dead center is suited for manual and CNC lathe work where the workpiece or center itself is stationary during the cut. Typical applications include shaft turning, cylindrical grinding setups, and between-center turning operations in metalworking environments. It is installed by machinists and toolroom technicians working on lathes equipped with a No. 5 Morse Taper tailstock. Because it is a solid (non-live) center, it is most appropriate for low-speed operations or where lubrication at the contact point is provided.

Key Features

• Standard 60-degree included angle point for conventional between-center turning
• No. 5 Morse Taper (5MT) shank for self-holding fit in compatible tailstock spindles
• 1.6929-inch head and point diameter for medium to large lathe work
• 8-inch overall length provides reach suitable for larger workpiece setups
• Carbon steel construction — solid, non-rotating dead center design
• Not carbide-tipped; intended for low-speed or lubricated contact applications

Compatibility

Designed as an OEM-style replacement or standard toolroom solid dead center for lathes equipped with a No. 5 Morse Taper (5MT) tailstock spindle bore.

Installation Notes

Installation is performed by machinists or toolroom technicians. Before installing or removing the center, power down the lathe and ensure the spindle is fully stopped. Insert the 5MT shank firmly into the tailstock spindle bore to seat the Morse Taper; use a drawbar or drift rod to remove when required. Because this is a solid dead center, apply appropriate cutting oil or grease to the contact point during use to prevent galling and heat buildup at the workpiece center hole.