Value Collection SC01412543 Seamless Ss Tube 0.5in Od 6ft

Product Description

The VALUE COLLECTION SC01412543 is a seamless 304 stainless steel tube intended for industrial, mechanical, and trade plumbing applications. Measuring 6 feet in length with an outside diameter of 0.5 inches and a wall thickness of 0.035 inches, this tube provides a clean, consistent bore and smooth exterior finish. The seamless construction eliminates weld seams, which reduces potential leak points and improves pressure integrity. Licensed plumbers, HVAC technicians, and industrial pipefitters commonly specify seamless stainless tubing for fluid transfer, instrumentation lines, and heat exchanger connections where corrosion resistance is critical.

This tube is suited for residential and light commercial plumbing, HVAC refrigerant line fabrication, and industrial instrumentation runs. The 304 stainless steel alloy resists corrosion in wet and mildly corrosive environments, making it appropriate for potable water systems, chemical transfer, and compressed air service where ferrous pipe would corrode prematurely. Its compact 0.5-inch OD fits standard tube fittings and ferrule-style compression connections commonly used in plumbing and mechanical systems.

Key Features

• Seamless construction eliminates weld-seam failure points for improved pressure integrity
• 304 stainless steel alloy provides corrosion resistance in wet and mildly corrosive service environments
• 0.5-inch OD is compatible with standard compression and ferrule-style tube fittings
• 0.035-inch wall thickness offers a balance of flexibility and structural rigidity for small-diameter tubing runs
• 6-foot length allows single-run installations without mid-run joints in most residential applications

Compatibility

Designed as an OEM-style and general-purpose replacement or new-installation tube for systems accepting 0.5-inch OD seamless stainless steel tubing with standard compression or ferrule fittings.

Installation Notes

Installation should be performed by a licensed plumber, HVAC technician, or qualified mechanical contractor in accordance with applicable local codes, IPC requirements, and system design specifications. Shut off all fluid supply and depressurize the line before cutting or fitting the tube. Use a proper tube cutter rated for stainless steel to avoid work-hardening the cut end, and deburr the interior edge before inserting ferrule fittings. Do not over-tighten compression fittings on thin-wall tubing, as deformation of the tube end can compromise the seal.