Value Collection SC01412519 Seamless Steel Tube 1/4 Od

Product Description

The VALUE COLLECTION SC01412519 is a seamless 304 stainless steel tube intended for use in fluid transfer, instrumentation, and mechanical applications across HVAC, plumbing, and industrial trade work. The tube measures 0.25 inches outside diameter with a 0.035-inch wall thickness, yielding an inside diameter of 0.180 inches. At 6 feet in length and weighing approximately 0.08 pounds, it is a lightweight, single-piece straight tube. The 304 stainless steel alloy provides solid corrosion resistance and is suitable for moderate-temperature service environments where carbon steel would be inappropriate.

This tube is commonly used in refrigeration sensing lines, instrument tubing runs, hydraulic pilot lines, and low-pressure fluid transfer applications. It suits residential and light commercial HVAC systems, plumbing rough-in work, and process instrumentation installations. The seamless construction makes it a preferred choice wherever a consistent wall thickness and reliable pressure boundary are required. Installers typically cut to length in the field using a tubing cutter rated for stainless steel.

Key Features

• Seamless construction for uniform wall thickness and consistent pressure performance
• 304 stainless steel alloy for corrosion resistance in wet or chemically active environments
• 0.25-inch outside diameter with 0.035-inch wall and 0.180-inch inside diameter
• 6-foot straight length allows field-cutting to required run dimensions
• Lightweight at 0.08 pounds, simplifying handling and transport on the job

Compatibility

Designed as an OEM-style replacement or new-install component for instrumentation, refrigeration sensing, and fluid transfer tubing applications requiring 1/4-inch OD seamless 304 stainless steel tube.

Installation Notes

Installation should be performed by a qualified HVAC technician, plumber, or pipefitter familiar with stainless steel tubing work. Isolate and depressurize the system completely before cutting or connecting this tube. Use a tubing cutter rated for stainless steel to avoid work-hardening the cut edge; deburr thoroughly before fitting compression or flare fittings. Follow applicable codes including ASME B31.1 or B31.3 for pressure piping as required by the application.