Value Collection S04185971 Cup Brush Steel Crimped

Product Description

The VALUE COLLECTION S04185971 is a crimped steel cup brush designed for surface preparation, weld cleanup, rust removal, and scale stripping on metal workpieces. The brush measures 2-5/8 inches in diameter with a 0.015 inch wire diameter, delivering a coarse cut that removes heavy deposits without requiring aggressive pressure. Wire fill is steel, suited for ferrous surfaces and general fabrication work. The threaded M14x2.00 arbor mounts directly to compatible angle grinders and bench grinders. Rated to 12,500 RPM, this brush handles both sustained production passes and intermittent spot work on a range of base metals. No guard is included.

This cup brush is used in welding, metal fabrication, HVAC, plumbing, and general industrial maintenance wherever surface contaminants must be removed before coating, welding, or inspection. It is well suited for technicians preparing pipe ends, stripping mill scale from structural steel, cleaning heat exchanger surfaces, or removing oxidation from mechanical components. The coarse wire grade makes it most effective on heavy buildup rather than fine finishing work. Package quantity is one brush per unit.

Key Features

• 2-5/8 inch brush diameter provides broad contact area for efficient surface coverage
• 0.015 inch crimped steel wire fill rated for coarse-grade stock removal
• Threaded M14x2.00 arbor fits standard angle grinder spindles
• 12,500 RPM maximum speed rating for use with common variable-speed grinders
• Crimped wire construction reduces wire breakage and extends service life compared to straight-set fill
• 18 mm trim length maintains consistent wire exposure through the service life of the brush

Compatibility

Designed to fit angle grinders and bench grinders equipped with an M14x2.00 threaded spindle. Verify spindle thread size and rated RPM of the host tool before installation.

Installation Notes

Always power down and disconnect or de-energize the grinder before mounting or removing the cup brush. Thread the M14x2.00 arbor onto the spindle by hand until seated, then snug with a wrench — do not over-tighten. Confirm that the tool's rated free speed does not exceed 12,500 RPM before operation. Wear appropriate PPE including a face shield, as wire bristle ejection is a recognized hazard with all cup brushes.