Value Collection S04064671 Wheel Brush 8 in Crimped

Product Description

The VALUE COLLECTION S04064671 is an 8-inch diameter wheel brush designed for aggressive surface preparation, deburring, and cleaning on metal and other hard materials. It mounts via a 1-1/4 inch arbor hole and uses crimped brass-coated steel fill wire with a filament diameter in the 0.010 to 0.019 inch range. Crimped wire construction provides consistent pressure across the work surface and helps the brush conform to irregular contours. Rated to 4,500 RPM, this brush is built for use on bench grinders, angle grinders, and similar arbor-driven machines. The 1 inch face width and 1-11/32 inch trim length deliver focused contact. No shank is included; arbor mounting hardware must be sourced separately.

This wheel brush is suited for metalworking, fabrication, and maintenance applications where wire brushing is required for weld cleanup, rust removal, scale removal, or surface conditioning. It is commonly used in machine shops, fabrication facilities, and industrial maintenance settings. The brass-coated steel wire is appropriate for use on ferrous metals where light contamination from pure steel wire is acceptable. At 2 pounds, the brush is sized for stationary or handheld power tool use by machinists, welders, and maintenance technicians.

Key Features

• 8 inch outside diameter wheel brush with a 1 inch face width
• Crimped brass-coated steel wire construction for consistent surface contact
• 1-1/4 inch arbor hole mount for use on standard bench and angle grinder arbors
• Maximum rated speed of 4,500 RPM
• Filament wire diameter range of 0.010 to 0.019 inches for aggressive material removal
• 1-11/32 inch trim length provides extended brush life and flex

Compatibility

Designed for use on arbor-driven power tools, including bench grinders and angle grinders that accept a 1-1/4 inch arbor hole mounting configuration.

Installation Notes

Installation should be performed by a qualified technician familiar with rotating abrasive and brushing tools. Always power down and lock out the machine before mounting or removing the brush. Verify that the tool spindle speed does not exceed the 4,500 RPM maximum rating of this brush before operation. Eye protection and appropriate PPE are required when operating wire wheel brushes; wire bristle ejection is a known hazard at operating speed.