Value Collection RVY5-12 Ring Terminal 12-10 Awg Crimp

Product Description

The VALUE COLLECTION RVY5-12 is a partially insulated circular ring terminal designed for crimp-style wire terminations in electrical wiring applications. It accepts 12 to 10 AWG conductors and features a copper contact for reliable conductivity. The yellow vinyl insulation identifies it as compatible with the 12 to 10 AWG wire range under standard color-coding conventions. The terminal measures 1.52 inches in overall length and 0.756 inches in ring width, with a stud hole sized for a 1/2-inch fastener. It is installed by electricians, maintenance technicians, and panel builders working on control panels, equipment wiring, and electrical distribution assemblies.

This ring terminal is suited for residential, commercial, and light industrial wiring tasks where a secure, insulated lug connection to a stud or screw terminal is required. Typical applications include motor control wiring, panel terminations, grounding connections, and equipment bonding points. The crimp connection method provides a gas-tight mechanical bond when applied with the correct crimping tool for the AWG range. The 1/2-inch stud size fits common terminal block hardware and machine screws used throughout electrical enclosures and junction boxes.

Key Features

• Partially insulated with yellow vinyl sleeve — identifies 12 to 10 AWG wire range at a glance
• Copper contact material for low-resistance electrical connection
• Crimp connection type — no soldering required, suitable for production and field use
• 1/2-inch stud size accommodates standard terminal block and panel hardware
• cUL Listed and UL Listed with RoHS compliance
• Overall length of 1.52 inches and ring width of 0.756 inches for compact fitment

Compatibility

Designed for use with 12 to 10 AWG copper conductors (4.00 to 6.00 sq mm) terminated to 1/2-inch stud fasteners in electrical panels, control enclosures, and equipment wiring assemblies.

Installation Notes

Installation should be performed by a qualified electrician in accordance with applicable NEC requirements. De-energize the circuit completely before terminating or inspecting any ring terminal connection. Use a ratcheting or calibrated crimp tool rated for 12 to 10 AWG insulated terminals to ensure a proper gas-tight crimp — never use pliers as a substitute for a crimping tool. Inspect the finished crimp for conductor pullout resistance and confirm the ring seats flush against the stud or screw before torquing the fastener.