Value Collection RNYDS5-4 Ring Terminal 10-12 Awg Crimp 50pk

Product Description

The VALUE COLLECTION RNYDS5-4 is a partially insulated circular ring terminal designed for crimp-style wire termination in electrical wiring applications. It accommodates wire sizes from 12 to 10 AWG (4.00 to 6.00 sq mm) and fits a No. 8 stud (M4, 4.30 mm). The copper contact is plated with TiN for improved corrosion resistance and conductivity. The nylon insulation sleeve is yellow, indicating compatibility with the 12-to-10 AWG wire range per standard color-coding conventions. Overall length is 0.894 inches and ring width is 0.283 inches. This terminal ships in a package of 50 units, suited to professional wiring jobs requiring consistent, code-compliant terminations.

This ring terminal is used in residential and light commercial electrical work, control panel wiring, HVAC low-voltage circuits, and general equipment hookups where a secure, permanent ring-lug connection to a screw or stud is required. The crimp connection style is appropriate for use with ratcheting or non-ratcheting wire crimpers in field and shop environments. Electricians, HVAC technicians, and panel builders will encounter this terminal type routinely when landing control wiring or grounding conductors on equipment studs.

Key Features

• Partially insulated nylon sleeve in yellow, matching the 12-to-10 AWG wire-range color code
• Copper contact with TiN plating for corrosion resistance and reliable conductivity
• Crimp connection type for fast, consistent, tool-applied terminations
• Fits No. 8 stud (M4, 4.30 mm) for secure mechanical attachment
• Compact form factor at 0.894 inches overall length and 0.283 inches ring width
• Packaged in quantities of 50 for professional and recurring-use applications

Compatibility

Designed as an OEM-style replacement and general-use ring terminal for 12 to 10 AWG wiring termination on No. 8 or M4 screws and studs in electrical, HVAC, and control panel applications.

Installation Notes

Installation should be performed by a licensed electrician or qualified technician in accordance with applicable NEC requirements. De-energize the circuit and verify zero voltage before making any terminations. Use an appropriately rated wire crimping tool sized for the 12-to-10 AWG range to achieve a proper mechanical crimp. Do not apply heat or solder to the crimp barrel, as this terminal is designed exclusively for crimp termination.