Value Collection PS-MH-HPC1-103 Hydraulic Pump Hose

Product Description

The VALUE COLLECTION PS-MH-HPC1-103 is a rubber hydraulic pump hose rated for high-pressure hydraulic fluid transfer in industrial and mobile equipment applications. Built with a 3/8 inch inside diameter and a 50-foot overall length, this hose handles demanding hydraulic circuits rated up to 10,000 psi. The black rubber construction resists abrasion and maintains flexibility under pressure. One end is fitted with a 3/8 NPT connection and the opposite end terminates in a 3/8 NPTF male fitting, providing a secure, leak-resistant seal. Hydraulic technicians and millwrights install this hose in pump-to-cylinder and pump-to-valve circuits where a long, flexible run is required.

This hose is suited for use in hydraulic power units, mobile equipment, industrial presses, and similar high-pressure fluid systems. The 50-foot length accommodates installations where the pump and actuator are separated by a significant distance, reducing the need for additional fittings and unions. The rubber body handles both petroleum-based and common water-glycol hydraulic fluids found in standard industrial service. The 10,000 psi pressure rating makes this hose appropriate for high-cycle, high-pressure applications common in manufacturing and heavy equipment maintenance environments.

Key Features

• 10,000 psi pressure rating for high-demand hydraulic circuits
• 3/8 inch inside diameter for compatible flow rates in standard hydraulic lines
• 50-foot overall length reduces the need for additional fittings in long runs
• Black rubber construction provides abrasion resistance and flexibility
• 3/8 NPT inlet end for standard hydraulic pump port connections
• 3/8 NPTF male opposite end for leak-resistant, dry-seal thread engagement

Compatibility

Designed as an OEM-style replacement or service hose for hydraulic pump assemblies requiring a 3/8 inch ID rubber hose with 3/8 NPT and 3/8 NPTF male end fittings at 10,000 psi working pressure.

Installation Notes

Installation should be performed by a qualified hydraulic technician. Depressurize and lock out the hydraulic system completely before removing or installing any hose. Inspect both NPT and NPTF fittings for clean, undamaged threads before makeup, and apply a compatible thread sealant rated for hydraulic service. Do not bend the hose below its minimum bend radius, and verify that the hose routing is free from sharp edges, heat sources, and abrasive contact points before returning the system to service.