Value Collection PB5- Crimp Bullet Connector 12-10 Awg

Product Description

The VALUE COLLECTION PB5- is a crimp-style bullet connector designed for splicing and terminating 12 to 10 AWG wire. The connector features a nylon insulated body in a natural color finish, with a copper contact and a bullet diameter of 0.362 inches (9.20 mm). Overall length is 0.701 inches (17.80 mm). It is rated cUL Listed and RoHS Compliant, making it suitable for applications that require recognized component certification. Electricians and technicians use this connector when a reliable, quick-disconnect bullet termination is needed in wiring harnesses, control circuits, or field wiring runs.

This connector is appropriate for residential and light commercial electrical work, automotive wiring, HVAC control wiring, and other low-voltage applications where 12 or 10 AWG conductors are used. The crimp termination method provides a secure, gas-tight connection without soldering. It is well suited for panel wiring, appliance repair, and equipment retrofits where bullet-style disconnects are the specified termination type. Sold individually with a minimum order quantity of 25 units.

Key Features

• Crimp termination for fast, reliable connections without soldering
• Compatible with 12 to 10 AWG wire (5.50 sq mm)
• Bullet diameter of 0.362 inches (9.20 mm) for standard bullet-connector fitment
• Nylon insulation in natural color for easy identification
• Copper contact material for good conductivity
• cUL Listed and RoHS Compliant

Compatibility

Designed as a standard crimp bullet connector for use with 12 to 10 AWG copper conductors in electrical, HVAC control, and automotive wiring applications requiring a 0.362-inch bullet diameter termination.

Installation Notes

Installation should be performed by a qualified electrician or technician following applicable NEC guidelines. De-energize the circuit completely before making any terminations. Use a calibrated ratchet crimp tool sized for the AWG and insulation type to ensure a proper crimp; under-crimped connections can result in high resistance or pull-out failure. Inspect the insulation sleeve after crimping to confirm it has not cracked or deformed.